Bonjour à tous,
Je reviens vers vous après avoir testé rapidement, sur mon RPi B+, la distro Minibian que je vous ai présentée dans mon dernier post.
Le login se fait en root uniquement avec le password raspberry.
A CHANGER IMMÉDIATEMENT
Code : Tout sélectionner
ssh root@my_rpi_ip
root@my_rpi_ip's password:
Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon Dec 22 13:56:42 2014 from n550jk-lan.maxty.lan
root@raspberrypi:~# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@raspberrypi:~#
Première info : le système ne prend que ~350Mo sur la carte :
Code : Tout sélectionner
root@raspberrypi:~# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 7.2G 343M 6.4G 5% /
/dev/root 7.2G 343M 6.4G 5% /
devtmpfs 239M 0 239M 0% /dev
tmpfs 49M 188K 49M 1% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 97M 0 97M 0% /run/shm
/dev/mmcblk0p1 48M 9.6M 39M 21% /boot
tmpfs 97M 0 97M 0% /tmp
J'ai étendu la partition afin que celle-ci utilise toute ma carte SD.
Si vous êtes effectivement un barbu et que vous raffolez du SSH pur, je ne vais pas vous faire l'affront en vous donnant la marche à suivre.
Les différentes commandes raspi sont présentes, à l’exception de la commande raspi-config :
Code : Tout sélectionner
root@raspberrypi:~# raspi
raspistill raspivid raspiyuv
root@raspberrypi:~# raspi
Mais peut être installée :
Code : Tout sélectionner
root@raspberrypi:~# apt-get install raspi-config
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
dmsetup libdevmapper1.02.1 libfribidi0 libnewt0.52 libparted0debian1 libpopt0 lua5.1 parted triggerhappy whiptail
Suggested packages:
libparted0-dev libparted0-i18n parted-doc
The following NEW packages will be installed:
dmsetup libdevmapper1.02.1 libfribidi0 libnewt0.52 libparted0debian1 libpopt0 lua5.1 parted raspi-config triggerhappy whiptail
0 upgraded, 11 newly installed, 0 to remove and 2 not upgraded.
Need to get 1,026 kB of archives.
After this operation, 3,173 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://archive.raspberrypi.org/debian/ wheezy/main raspi-config all 20140902-1 [11.5 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main dmsetup armhf 2:1.02.74-8+rpi1 [67.3 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libdevmapper1.02.1 armhf 2:1.02.74-8+rpi1 [131 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libnewt0.52 armhf 0.52.14-11.1 [71.9 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ wheezy/main lua5.1 armhf 5.1.5-4+deb7u1 [126 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libpopt0 armhf 1.16-7 [56.5 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libfribidi0 armhf 0.19.2-3 [35.6 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libparted0debian1 armhf 2.3-12 [305 kB]
Get:9 http://mirrordirector.raspbian.org/raspbian/ wheezy/main whiptail armhf 0.52.14-11.1 [33.3 kB]
Get:10 http://mirrordirector.raspbian.org/raspbian/ wheezy/main parted armhf 2.3-12 [158 kB]
Get:11 http://mirrordirector.raspbian.org/raspbian/ wheezy/main triggerhappy armhf 0.3.4-2 [31.2 kB]
Fetched 1,026 kB in 2s (453 kB/s)
Selecting previously unselected package libnewt0.52.
(Reading database ... 12735 files and directories currently installed.)
Unpacking libnewt0.52 (from .../libnewt0.52_0.52.14-11.1_armhf.deb) ...
Selecting previously unselected package libpopt0:armhf.
Unpacking libpopt0:armhf (from .../libpopt0_1.16-7_armhf.deb) ...
Selecting previously unselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.74-8+rpi1_armhf.deb) ...
Selecting previously unselected package libdevmapper1.02.1:armhf.
Unpacking libdevmapper1.02.1:armhf (from .../libdevmapper1.02.1_2%3a1.02.74-8+rpi1_armhf.deb) ...
Selecting previously unselected package libfribidi0:armhf.
Unpacking libfribidi0:armhf (from .../libfribidi0_0.19.2-3_armhf.deb) ...
Selecting previously unselected package libparted0debian1:armhf.
Unpacking libparted0debian1:armhf (from .../libparted0debian1_2.3-12_armhf.deb) ...
Selecting previously unselected package whiptail.
Unpacking whiptail (from .../whiptail_0.52.14-11.1_armhf.deb) ...
Selecting previously unselected package lua5.1.
Unpacking lua5.1 (from .../lua5.1_5.1.5-4+deb7u1_armhf.deb) ...
Selecting previously unselected package parted.
Unpacking parted (from .../parted_2.3-12_armhf.deb) ...
Selecting previously unselected package triggerhappy.
Unpacking triggerhappy (from .../triggerhappy_0.3.4-2_armhf.deb) ...
Selecting previously unselected package raspi-config.
Unpacking raspi-config (from .../raspi-config_20140902-1_all.deb) ...
Processing triggers for man-db ...
Setting up libnewt0.52 (0.52.14-11.1) ...
Setting up libpopt0:armhf (1.16-7) ...
Setting up libfribidi0:armhf (0.19.2-3) ...
Setting up whiptail (0.52.14-11.1) ...
Setting up lua5.1 (5.1.5-4+deb7u1) ...
update-alternatives: using /usr/bin/lua5.1 to provide /usr/bin/lua (lua-interpreter) in auto mode
update-alternatives: using /usr/bin/luac5.1 to provide /usr/bin/luac (lua-compiler) in auto mode
Setting up triggerhappy (0.3.4-2) ...
Error opening '/dev/input/event*': No such file or directory
Setting up libdevmapper1.02.1:armhf (2:1.02.74-8+rpi1) ...
Setting up libparted0debian1:armhf (2.3-12) ...
Setting up parted (2.3-12) ...
Setting up raspi-config (20140902-1) ...
Setting up dmsetup (2:1.02.74-8+rpi1) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
ln: failed to create hard link `/boot/initrd.img-3.12-1-rpi.dpkg-bak' => `/boot/initrd.img-3.12-1-rpi': Operation not permitted
update-initramfs: Generating /boot/initrd.img-3.12-1-rpi
L'erreur présente ici est Normale et non critique :
Code : Tout sélectionner
Processing triggers for initramfs-tools ...
ln: failed to create hard link `/boot/initrd.img-3.12-1-rpi.dpkg-bak' => `/boot/initrd.img-3.12-1-rpi': Operation not permitted
Le script de mise à jour essaye de créer un lien sur un partition FAT32, alors que c'est impossible.
Le fichier config.txt est minimal :
La commande "aptitude" n'est pas installée par défaut, mais la suite apt est présente.
La configuration des Repo Raspbian est présente :
Code : Tout sélectionner
root@raspberrypi:~# cat /etc/apt/sources.list
deb http://mirrordirector.raspbian.org/raspbian wheezy main
deb http://archive.raspberrypi.org/debian wheezy main
La distro Minibian est à mettre à jour (NTP + Kernel) :
Code : Tout sélectionner
root@raspberrypi:~# apt-get update
Get:1 http://mirrordirector.raspbian.org wheezy Release.gpg [490 B]
Get:2 http://archive.raspberrypi.org wheezy Release.gpg [490 B]
Get:3 http://mirrordirector.raspbian.org wheezy Release [14.4 kB]
Get:4 http://archive.raspberrypi.org wheezy Release [10.2 kB]
Get:5 http://mirrordirector.raspbian.org wheezy/main armhf Packages [9,533 kB]
Hit http://archive.raspberrypi.org wheezy/main armhf Packages
Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
Ign http://archive.raspberrypi.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
Fetched 9,558 kB in 24s (393 kB/s)
Reading package lists... Done
root@raspberrypi:~# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
libgcc1 libstdc++6
The following packages will be upgraded:
linux-image-3.12-1-rpi ntp
2 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
Need to get 13.5 MB of archives.
After this operation, 131 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://mirrordirector.raspbian.org/raspbian/ wheezy/main linux-image-3.12-1-rpi armhf 3.12.9-1+rpi2 [12.9 MB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main ntp armhf 1:4.2.6.p5+dfsg-2+deb7u1 [524 kB]
Fetched 13.5 MB in 7s (1,717 kB/s)
Preconfiguring packages ...
(Reading database ... 12734 files and directories currently installed.)
Preparing to replace linux-image-3.12-1-rpi 3.12.9-1+rpi1 (using .../linux-image-3.12-1-rpi_3.12.9-1+rpi2_armhf.deb) ...
Unpacking replacement linux-image-3.12-1-rpi ...
Preparing to replace ntp 1:4.2.6.p5+dfsg-2 (using .../ntp_1%3a4.2.6.p5+dfsg-2+deb7u1_armhf.deb) ...
[ ok ] Stopping NTP server: ntpd.
Unpacking replacement ntp ...
Processing triggers for man-db ...
Setting up linux-image-3.12-1-rpi (3.12.9-1+rpi2) ...
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-3.12-1-rpi
Setting up ntp (1:4.2.6.p5+dfsg-2+deb7u1) ...
[ ok ] Starting NTP server: ntpd.
N'oubliez pas de redémarrer.
Aptitude est devenue LA commande de références sur Debian, j'ai pris le parti de l'installer.
J'ai également installé le paquet "bash-completion", ce paquet permet à bash d'étendre se capacité à completer les commandes avec un double TAB, leur options entre autre.
Code : Tout sélectionner
root@raspberrypi:~# apt-get install aptitude bash-completion
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
apt-xapian-index aptitude-common aptitude-doc-en file iso-codes libboost-iostreams1.49.0 libclass-accessor-perl libclass-isa-perl libcwidget3 libencode-locale-perl libept1.4.12 libexpat1 libfile-listing-perl libfont-afm-perl
libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-template-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl
libio-socket-ip-perl libio-socket-ssl-perl libio-string-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libmagic1 libmailtools-perl libnet-http-perl libnet-ssleay-perl libparse-debianchangelog-perl libsigc++-2.0-0c2a
libsocket-perl libsqlite3-0 libsub-name-perl libswitch-perl libtimedate-perl liburi-perl libwww-perl libwww-robotrules-perl libxapian22 libxml-namespacesupport-perl libxml-parser-perl libxml-sax-base-perl libxml-sax-expat-perl
libxml-sax-perl libxml-simple-perl lsb-release mime-support perl perl-modules python python-apt python-apt-common python-chardet python-debian python-minimal python-support python-xapian python2.7 python2.7-minimal ucf xz-utils
Suggested packages:
app-install-data python-xdg tasksel debtags isoquery libcwidget-dev libdata-dump-perl libipc-sharedcache-perl libcrypt-ssleay-perl libmime-base64-perl libauthen-ntlm-perl xapian-tools lsb perl-doc libterm-readline-gnu-perl
libterm-readline-perl-perl make libpod-plainer-perl python-doc python-tk python-apt-dbg python-gtk2 python-vte python-apt-doc xapian-doc python2.7-doc binutils binfmt-support
The following NEW packages will be installed:
apt-xapian-index aptitude aptitude-common aptitude-doc-en bash-completion file iso-codes libboost-iostreams1.49.0 libclass-accessor-perl libclass-isa-perl libcwidget3 libencode-locale-perl libept1.4.12 libexpat1 libfile-listing-perl
libfont-afm-perl libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-template-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl
libhttp-negotiate-perl libio-socket-ip-perl libio-socket-ssl-perl libio-string-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libmagic1 libmailtools-perl libnet-http-perl libnet-ssleay-perl libparse-debianchangelog-perl
libsigc++-2.0-0c2a libsocket-perl libsqlite3-0 libsub-name-perl libswitch-perl libtimedate-perl liburi-perl libwww-perl libwww-robotrules-perl libxapian22 libxml-namespacesupport-perl libxml-parser-perl libxml-sax-base-perl
libxml-sax-expat-perl libxml-sax-perl libxml-simple-perl lsb-release mime-support perl perl-modules python python-apt python-apt-common python-chardet python-debian python-minimal python-support python-xapian python2.7
python2.7-minimal ucf xz-utils
0 upgraded, 69 newly installed, 0 to remove and 2 not upgraded.
Need to get 23.5 MB of archives.
After this operation, 92.2 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://mirrordirector.raspbian.org/raspbian/ wheezy/main bash-completion all 1:2.0-1 [193 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libmagic1 armhf 5.11-2+deb7u6 [200 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libsqlite3-0 armhf 3.7.13-1+deb7u1 [414 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ wheezy/main aptitude-common all 0.6.8.2-1 [1,497 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libexpat1 armhf 2.1.0-1+deb7u1 [116 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libsigc++-2.0-0c2a armhf 2.2.10-0.2 [40.4 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ wheezy/main xz-utils armhf 5.1.1alpha+20120614-2 [237 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libboost-iostreams1.49.0 armhf 1.49.0-3.2 [53.3 kB]
Get:9 http://mirrordirector.raspbian.org/raspbian/ wheezy/main file armhf 5.11-2+deb7u6 [52.3 kB]
Get:10 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libcwidget3 armhf 0.5.16-3.4 [373 kB]
Get:11 http://mirrordirector.raspbian.org/raspbian/ wheezy/main perl-modules all 5.14.2-21+rpi2+deb7u1 [3,442 kB]
Get:12 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libxapian22 armhf 1.2.12-2 [1,110 kB]
Get:13 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libept1.4.12 armhf 1.0.9 [128 kB]
Get:14 http://mirrordirector.raspbian.org/raspbian/ wheezy/main aptitude armhf 0.6.8.2-1 [1,187 kB]
Get:15 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libclass-isa-perl all 0.36-3 [12.3 kB]
Get:16 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libswitch-perl all 2.16-2 [20.9 kB]
Get:17 http://mirrordirector.raspbian.org/raspbian/ wheezy/main mime-support all 3.52-1 [35.5 kB]
Get:18 http://mirrordirector.raspbian.org/raspbian/ wheezy/main perl armhf 5.14.2-21+rpi2+deb7u1 [3,661 kB]
Get:19 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-apt-common all 0.8.8.2 [115 kB]
Get:20 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-apt armhf 0.8.8.2 [289 kB]
Get:21 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-support all 1.0.15 [33.6 kB]
Get:22 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-xapian armhf 1.2.12-2 [568 kB]
Get:23 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-chardet all 2.0.1-2 [177 kB]
Get:24 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-debian all 0.1.21 [61.3 kB]
Get:25 http://mirrordirector.raspbian.org/raspbian/ wheezy/main apt-xapian-index all 0.45 [68.4 kB]
Get:26 http://mirrordirector.raspbian.org/raspbian/ wheezy/main aptitude-doc-en all 0.6.8.2-1 [418 kB]
Get:27 http://mirrordirector.raspbian.org/raspbian/ wheezy/main iso-codes all 3.41-1 [2,068 kB]
Get:28 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python2.7-minimal armhf 2.7.3-6+deb7u2 [1,681 kB]
Get:29 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libsub-name-perl armhf 0.05-1 [9,864 B]
Get:30 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libclass-accessor-perl all 0.34-1 [25.9 kB]
Get:31 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python2.7 armhf 2.7.3-6+deb7u2 [2,687 kB]
Get:32 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libencode-locale-perl all 1.03-1 [13.6 kB]
Get:33 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libtimedate-perl all 1.2000-1 [41.2 kB]
Get:34 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhttp-date-perl all 6.02-1 [10.7 kB]
Get:35 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libfile-listing-perl all 6.04-1 [10.3 kB]
Get:36 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libfont-afm-perl all 1.20-1 [14.4 kB]
Get:37 http://mirrordirector.raspbian.org/raspbian/ wheezy/main liburi-perl all 1.60-1 [100 kB]
Get:38 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhtml-tagset-perl all 3.20-2 [13.5 kB]
Get:39 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhtml-parser-perl armhf 3.69-2 [113 kB]
Get:40 http://mirrordirector.raspbian.org/raspbian/ wheezy/main liblwp-mediatypes-perl all 6.02-1 [22.1 kB]
Get:41 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhttp-message-perl all 6.03-1 [78.5 kB]
Get:42 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhtml-form-perl all 6.03-1 [23.9 kB]
Get:43 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhtml-tree-perl all 5.02-1 [225 kB]
Get:44 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhtml-format-perl all 2.10-1 [42.1 kB]
Get:45 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhtml-template-perl all 2.91-1 [72.0 kB]
Get:46 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhttp-cookies-perl all 6.00-2 [23.5 kB]
Get:47 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhttp-daemon-perl all 6.01-1 [17.3 kB]
Get:48 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libhttp-negotiate-perl all 6.00-2 [13.6 kB]
Get:49 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libio-socket-ip-perl all 0.16-2 [23.6 kB]
Get:50 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libnet-ssleay-perl armhf 1.48-1 [317 kB]
Get:51 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-minimal all 2.7.3-4+deb7u1 [42.8 kB]
Get:52 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libio-socket-ssl-perl all 1.76-2 [68.0 kB]
Get:53 http://mirrordirector.raspbian.org/raspbian/ wheezy/main python all 2.7.3-4+deb7u1 [181 kB]
Get:54 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libio-string-perl all 1.08-2 [12.0 kB]
Get:55 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libnet-http-perl all 6.03-2 [24.3 kB]
Get:56 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libwww-robotrules-perl all 6.01-1 [14.3 kB]
Get:57 http://mirrordirector.raspbian.org/raspbian/ wheezy/main ucf all 3.0025+nmu3 [70.8 kB]
Get:58 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libwww-perl all 6.04-1 [203 kB]
Get:59 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libsocket-perl armhf 2.002-1+rpi1 [37.6 kB]
Get:60 http://mirrordirector.raspbian.org/raspbian/ wheezy/main liblwp-protocol-https-perl all 6.03-1 [7,580 B]
Get:61 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libmailtools-perl all 2.09-1 [97.6 kB]
Get:62 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libxml-sax-perl all 0.99+dfsg-2 [68.3 kB]
Get:63 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libparse-debianchangelog-perl all 1.2.0-1 [62.3 kB]
Get:64 http://mirrordirector.raspbian.org/raspbian/ wheezy/main lsb-release all 4.1+Debian8+rpi1+deb7u1 [26.8 kB]
Get:65 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libxml-namespacesupport-perl all 1.09-3 [15.3 kB]
Get:66 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libxml-parser-perl armhf 2.41-1 [309 kB]
Get:67 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libxml-sax-base-perl all 1.07-1 [23.1 kB]
Get:68 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libxml-sax-expat-perl all 0.40-2 [12.9 kB]
Get:69 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libxml-simple-perl all 2.20-1 [74.7 kB]
Fetched 23.5 MB in 15s (1,526 kB/s)
Extracting templates from packages: 100%
Preconfiguring packages ...
Selecting previously unselected package bash-completion.
(Reading database ... 12952 files and directories currently installed.)
Unpacking bash-completion (from .../bash-completion_1%3a2.0-1_all.deb) ...
Selecting previously unselected package libmagic1:armhf.
Unpacking libmagic1:armhf (from .../libmagic1_5.11-2+deb7u6_armhf.deb) ...
Selecting previously unselected package libsqlite3-0:armhf.
Unpacking libsqlite3-0:armhf (from .../libsqlite3-0_3.7.13-1+deb7u1_armhf.deb) ...
Selecting previously unselected package libexpat1:armhf.
Unpacking libexpat1:armhf (from .../libexpat1_2.1.0-1+deb7u1_armhf.deb) ...
Selecting previously unselected package libsigc++-2.0-0c2a:armhf.
Unpacking libsigc++-2.0-0c2a:armhf (from .../libsigc++-2.0-0c2a_2.2.10-0.2_armhf.deb) ...
Selecting previously unselected package aptitude-common.
Unpacking aptitude-common (from .../aptitude-common_0.6.8.2-1_all.deb) ...
Selecting previously unselected package libboost-iostreams1.49.0.
Unpacking libboost-iostreams1.49.0 (from .../libboost-iostreams1.49.0_1.49.0-3.2_armhf.deb) ...
Selecting previously unselected package libcwidget3.
Unpacking libcwidget3 (from .../libcwidget3_0.5.16-3.4_armhf.deb) ...
Selecting previously unselected package libxapian22.
Unpacking libxapian22 (from .../libxapian22_1.2.12-2_armhf.deb) ...
Selecting previously unselected package libept1.4.12.
Unpacking libept1.4.12 (from .../libept1.4.12_1.0.9_armhf.deb) ...
Selecting previously unselected package aptitude.
Unpacking aptitude (from .../aptitude_0.6.8.2-1_armhf.deb) ...
Selecting previously unselected package xz-utils.
Unpacking xz-utils (from .../xz-utils_5.1.1alpha+20120614-2_armhf.deb) ...
Selecting previously unselected package file.
Unpacking file (from .../file_5.11-2+deb7u6_armhf.deb) ...
Selecting previously unselected package libclass-isa-perl.
Unpacking libclass-isa-perl (from .../libclass-isa-perl_0.36-3_all.deb) ...
Selecting previously unselected package perl-modules.
Unpacking perl-modules (from .../perl-modules_5.14.2-21+rpi2+deb7u1_all.deb) ...
Selecting previously unselected package perl.
Unpacking perl (from .../perl_5.14.2-21+rpi2+deb7u1_armhf.deb) ...
Selecting previously unselected package libswitch-perl.
Unpacking libswitch-perl (from .../libswitch-perl_2.16-2_all.deb) ...
Selecting previously unselected package mime-support.
Unpacking mime-support (from .../mime-support_3.52-1_all.deb) ...
Selecting previously unselected package python2.7-minimal.
Unpacking python2.7-minimal (from .../python2.7-minimal_2.7.3-6+deb7u2_armhf.deb) ...
Selecting previously unselected package python2.7.
Unpacking python2.7 (from .../python2.7_2.7.3-6+deb7u2_armhf.deb) ...
Selecting previously unselected package python-minimal.
Unpacking python-minimal (from .../python-minimal_2.7.3-4+deb7u1_all.deb) ...
Selecting previously unselected package python.
Unpacking python (from .../python_2.7.3-4+deb7u1_all.deb) ...
Selecting previously unselected package python-apt-common.
Unpacking python-apt-common (from .../python-apt-common_0.8.8.2_all.deb) ...
Selecting previously unselected package python-apt.
Unpacking python-apt (from .../python-apt_0.8.8.2_armhf.deb) ...
Selecting previously unselected package python-support.
Unpacking python-support (from .../python-support_1.0.15_all.deb) ...
Selecting previously unselected package ucf.
Unpacking ucf (from .../ucf_3.0025+nmu3_all.deb) ...
Moving old data out of the way
Selecting previously unselected package python-xapian.
Unpacking python-xapian (from .../python-xapian_1.2.12-2_armhf.deb) ...
Selecting previously unselected package python-chardet.
Unpacking python-chardet (from .../python-chardet_2.0.1-2_all.deb) ...
Selecting previously unselected package python-debian.
Unpacking python-debian (from .../python-debian_0.1.21_all.deb) ...
Selecting previously unselected package apt-xapian-index.
Unpacking apt-xapian-index (from .../apt-xapian-index_0.45_all.deb) ...
Selecting previously unselected package aptitude-doc-en.
Unpacking aptitude-doc-en (from .../aptitude-doc-en_0.6.8.2-1_all.deb) ...
Selecting previously unselected package iso-codes.
Unpacking iso-codes (from .../iso-codes_3.41-1_all.deb) ...
Selecting previously unselected package libsub-name-perl.
Unpacking libsub-name-perl (from .../libsub-name-perl_0.05-1_armhf.deb) ...
Selecting previously unselected package libclass-accessor-perl.
Unpacking libclass-accessor-perl (from .../libclass-accessor-perl_0.34-1_all.deb) ...
Selecting previously unselected package libencode-locale-perl.
Unpacking libencode-locale-perl (from .../libencode-locale-perl_1.03-1_all.deb) ...
Selecting previously unselected package libtimedate-perl.
Unpacking libtimedate-perl (from .../libtimedate-perl_1.2000-1_all.deb) ...
Selecting previously unselected package libhttp-date-perl.
Unpacking libhttp-date-perl (from .../libhttp-date-perl_6.02-1_all.deb) ...
Selecting previously unselected package libfile-listing-perl.
Unpacking libfile-listing-perl (from .../libfile-listing-perl_6.04-1_all.deb) ...
Selecting previously unselected package libfont-afm-perl.
Unpacking libfont-afm-perl (from .../libfont-afm-perl_1.20-1_all.deb) ...
Selecting previously unselected package liburi-perl.
Unpacking liburi-perl (from .../liburi-perl_1.60-1_all.deb) ...
Selecting previously unselected package libhtml-tagset-perl.
Unpacking libhtml-tagset-perl (from .../libhtml-tagset-perl_3.20-2_all.deb) ...
Selecting previously unselected package libhtml-parser-perl.
Unpacking libhtml-parser-perl (from .../libhtml-parser-perl_3.69-2_armhf.deb) ...
Selecting previously unselected package liblwp-mediatypes-perl.
Unpacking liblwp-mediatypes-perl (from .../liblwp-mediatypes-perl_6.02-1_all.deb) ...
Selecting previously unselected package libhttp-message-perl.
Unpacking libhttp-message-perl (from .../libhttp-message-perl_6.03-1_all.deb) ...
Selecting previously unselected package libhtml-form-perl.
Unpacking libhtml-form-perl (from .../libhtml-form-perl_6.03-1_all.deb) ...
Selecting previously unselected package libhtml-tree-perl.
Unpacking libhtml-tree-perl (from .../libhtml-tree-perl_5.02-1_all.deb) ...
Selecting previously unselected package libhtml-format-perl.
Unpacking libhtml-format-perl (from .../libhtml-format-perl_2.10-1_all.deb) ...
Selecting previously unselected package libhtml-template-perl.
Unpacking libhtml-template-perl (from .../libhtml-template-perl_2.91-1_all.deb) ...
Selecting previously unselected package libhttp-cookies-perl.
Unpacking libhttp-cookies-perl (from .../libhttp-cookies-perl_6.00-2_all.deb) ...
Selecting previously unselected package libhttp-daemon-perl.
Unpacking libhttp-daemon-perl (from .../libhttp-daemon-perl_6.01-1_all.deb) ...
Selecting previously unselected package libhttp-negotiate-perl.
Unpacking libhttp-negotiate-perl (from .../libhttp-negotiate-perl_6.00-2_all.deb) ...
Selecting previously unselected package libsocket-perl.
Unpacking libsocket-perl (from .../libsocket-perl_2.002-1+rpi1_armhf.deb) ...
Selecting previously unselected package libio-socket-ip-perl.
Unpacking libio-socket-ip-perl (from .../libio-socket-ip-perl_0.16-2_all.deb) ...
Selecting previously unselected package libnet-ssleay-perl.
Unpacking libnet-ssleay-perl (from .../libnet-ssleay-perl_1.48-1_armhf.deb) ...
Selecting previously unselected package libio-socket-ssl-perl.
Unpacking libio-socket-ssl-perl (from .../libio-socket-ssl-perl_1.76-2_all.deb) ...
Selecting previously unselected package libio-string-perl.
Unpacking libio-string-perl (from .../libio-string-perl_1.08-2_all.deb) ...
Selecting previously unselected package libnet-http-perl.
Unpacking libnet-http-perl (from .../libnet-http-perl_6.03-2_all.deb) ...
Selecting previously unselected package libwww-robotrules-perl.
Unpacking libwww-robotrules-perl (from .../libwww-robotrules-perl_6.01-1_all.deb) ...
Selecting previously unselected package libwww-perl.
Unpacking libwww-perl (from .../libwww-perl_6.04-1_all.deb) ...
Selecting previously unselected package liblwp-protocol-https-perl.
Unpacking liblwp-protocol-https-perl (from .../liblwp-protocol-https-perl_6.03-1_all.deb) ...
Selecting previously unselected package libmailtools-perl.
Unpacking libmailtools-perl (from .../libmailtools-perl_2.09-1_all.deb) ...
Selecting previously unselected package libparse-debianchangelog-perl.
Unpacking libparse-debianchangelog-perl (from .../libparse-debianchangelog-perl_1.2.0-1_all.deb) ...
Selecting previously unselected package libxml-namespacesupport-perl.
Unpacking libxml-namespacesupport-perl (from .../libxml-namespacesupport-perl_1.09-3_all.deb) ...
Selecting previously unselected package libxml-parser-perl.
Unpacking libxml-parser-perl (from .../libxml-parser-perl_2.41-1_armhf.deb) ...
Selecting previously unselected package libxml-sax-base-perl.
Unpacking libxml-sax-base-perl (from .../libxml-sax-base-perl_1.07-1_all.deb) ...
Selecting previously unselected package libxml-sax-perl.
Unpacking libxml-sax-perl (from .../libxml-sax-perl_0.99+dfsg-2_all.deb) ...
Selecting previously unselected package libxml-sax-expat-perl.
Unpacking libxml-sax-expat-perl (from .../libxml-sax-expat-perl_0.40-2_all.deb) ...
Selecting previously unselected package libxml-simple-perl.
Unpacking libxml-simple-perl (from .../libxml-simple-perl_2.20-1_all.deb) ...
Selecting previously unselected package lsb-release.
Unpacking lsb-release (from .../lsb-release_4.1+Debian8+rpi1+deb7u1_all.deb) ...
Processing triggers for man-db ...
Setting up bash-completion (1:2.0-1) ...
Setting up libmagic1:armhf (5.11-2+deb7u6) ...
Setting up libsqlite3-0:armhf (3.7.13-1+deb7u1) ...
Setting up libexpat1:armhf (2.1.0-1+deb7u1) ...
Setting up libsigc++-2.0-0c2a:armhf (2.2.10-0.2) ...
Setting up aptitude-common (0.6.8.2-1) ...
Setting up libboost-iostreams1.49.0 (1.49.0-3.2) ...
Setting up libcwidget3 (0.5.16-3.4) ...
Setting up libxapian22 (1.2.12-2) ...
Setting up libept1.4.12 (1.0.9) ...
Setting up aptitude (0.6.8.2-1) ...
update-alternatives: using /usr/bin/aptitude-curses to provide /usr/bin/aptitude (aptitude) in auto mode
Setting up xz-utils (5.1.1alpha+20120614-2) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up file (5.11-2+deb7u6) ...
Setting up libclass-isa-perl (0.36-3) ...
Setting up mime-support (3.52-1) ...
Setting up python2.7-minimal (2.7.3-6+deb7u2) ...
Linking and byte-compiling packages for runtime python2.7...
Setting up python2.7 (2.7.3-6+deb7u2) ...
Setting up python-minimal (2.7.3-4+deb7u1) ...
Setting up python (2.7.3-4+deb7u1) ...
Setting up python-apt-common (0.8.8.2) ...
Setting up python-apt (0.8.8.2) ...
Setting up python-support (1.0.15) ...
Setting up ucf (3.0025+nmu3) ...
Setting up python-xapian (1.2.12-2) ...
Setting up python-chardet (2.0.1-2) ...
Setting up python-debian (0.1.21) ...
Setting up apt-xapian-index (0.45) ...
apt-xapian-index: Building new index in background...
Setting up aptitude-doc-en (0.6.8.2-1) ...
Setting up iso-codes (3.41-1) ...
Setting up lsb-release (4.1+Debian8+rpi1+deb7u1) ...
Setting up libswitch-perl (2.16-2) ...
Setting up perl-modules (5.14.2-21+rpi2+deb7u1) ...
Setting up perl (5.14.2-21+rpi2+deb7u1) ...
update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode
Setting up libsub-name-perl (0.05-1) ...
Setting up libclass-accessor-perl (0.34-1) ...
Setting up libencode-locale-perl (1.03-1) ...
Setting up libtimedate-perl (1.2000-1) ...
Setting up libhttp-date-perl (6.02-1) ...
Setting up libfile-listing-perl (6.04-1) ...
Setting up libfont-afm-perl (1.20-1) ...
Setting up liburi-perl (1.60-1) ...
Setting up libhtml-tagset-perl (3.20-2) ...
Setting up libhtml-parser-perl (3.69-2) ...
Setting up liblwp-mediatypes-perl (6.02-1) ...
Setting up libhttp-message-perl (6.03-1) ...
Setting up libhtml-form-perl (6.03-1) ...
Setting up libhtml-tree-perl (5.02-1) ...
Setting up libhtml-format-perl (2.10-1) ...
Setting up libhtml-template-perl (2.91-1) ...
Setting up libhttp-cookies-perl (6.00-2) ...
Setting up libhttp-daemon-perl (6.01-1) ...
Setting up libhttp-negotiate-perl (6.00-2) ...
Setting up libsocket-perl (2.002-1+rpi1) ...
Setting up libio-socket-ip-perl (0.16-2) ...
Setting up libnet-ssleay-perl (1.48-1) ...
Setting up libio-socket-ssl-perl (1.76-2) ...
Setting up libio-string-perl (1.08-2) ...
Setting up libnet-http-perl (6.03-2) ...
Setting up libwww-robotrules-perl (6.01-1) ...
Setting up liblwp-protocol-https-perl (6.03-1) ...
Setting up libmailtools-perl (2.09-1) ...
Setting up libparse-debianchangelog-perl (1.2.0-1) ...
Setting up libxml-namespacesupport-perl (1.09-3) ...
Setting up libxml-sax-base-perl (1.07-1) ...
Setting up libxml-sax-perl (0.99+dfsg-2) ...
update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Setting up libwww-perl (6.04-1) ...
Setting up libxml-parser-perl (2.41-1) ...
Setting up libxml-sax-expat-perl (0.40-2) ...
update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::Expat with priority 50...
update-perl-sax-parsers: Updating overall Perl SAX parser modules info file...
Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version
Setting up libxml-simple-perl (2.20-1) ...
Processing triggers for python-support ...
root@raspberrypi:~#
Après ces premières modifications, j'ai un système qui fait :
Code : Tout sélectionner
root@raspberrypi:~# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 7.2G 519M 6.3G 8% /
/dev/root 7.2G 519M 6.3G 8% /
devtmpfs 239M 0 239M 0% /dev
tmpfs 49M 192K 49M 1% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 97M 0 97M 0% /run/shm
/dev/mmcblk0p1 48M 18M 30M 38% /boot
tmpfs 97M 0 97M 0% /tmp
Je ne suis pas entrer plus en profondeur dans le système, mais à première vue, celui-ci est correct pour les différents projets que vous avez dans vos cartons.
Si vous avez des difficultés avec cette distribution, n'hésitez pas à revenir en faire part.
Bonne journée,
