Newbie cherche *** censure *** en parametrage ethernet

[Gaara]

Edit:
Il faudra faire sans doute

Code : Tout sélectionner

sudo service networking restart

après avoir chargé le module

[Clemzo]

>> service networking restart
Ne fait rien de mieux que le boot

>> ifconfig
Ne me renvoi que la boucle locale

désolé mais je ne peux pas faire de copie d'écran en l'absence de liaison ethernet.

[Gaara]

Bon.. ben je sais pas trop... J'ai vu une solution sur le net mais je pense pas que ça fonctionne, car c'est une autre distribution (Kali linux). La solution consiste de remplacer les fichiers uImage et script.bin de la première partition.
Je t'envoie quand même mon lsmod, car il y a d'autres modules que tu pourrais essayer de charger (sauf les #):

Code : Tout sélectionner

$ lsmod
Module                  Size  Used by
8021q                  18594  0 
garp                    6114  1 8021q
stp                     1993  1 garp
llc                     5491  2 stp,garp
cpufreq_stats           5901  0 
cpufreq_userspace       3294  0 
cpufreq_conservative     5966  0 
cpufreq_powersave       1197  0 
8188eu                731474  0   # installé à la main pour le wifi interne, ne fonctionne pas
8192cu                453523  0   # installé à la main pour un dongle wifi usb, fonctionne

N'oublies pas le

Code : Tout sélectionner

sudo service networking restart

J'aurais dû y penser avant, car un module seul ne suffit pas !

[Clemzo]

J'ai effectué des modprob pour tous les modules manquants et j'obtiens le même lsmod que toi par contre le network restart n'améliore pas la situation.

[Gaara]

Bizarre..
Tout ce que je peux faire c'est t'envoyer mon dmesg entier, pour que tu compares ligne par ligne. Travail fastidieux en vue... (bien sur, ne pas prendre en compte le disque SATA branché en USB + les drivers autres listés dans le modprobe)
Bon courage :p

Code : Tout sélectionner

$ dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.105+ (orangepi@orangepi) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Wed Jan 21 12:59:18 CET 2015
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun7i
[    0.000000] Memory Reserved:
[    0.000000]  SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
[    0.000000]  VE   : 0x44000000 - 0x48ffffff  (  80 MB)
[    0.000000]  G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
[    0.000000]  LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c0910ac0, node_mem_map d0000000
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65024 pages, LIFO batch:15
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 128016 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67056 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s7680 r8192 d12800 u32768
[    0.000000] pcpu-alloc: s7680 r8192 d12800 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 disp.screen0_output_mode=EDID:1280x720p50 hdmi.audio=EDID:0 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 895140k/895140k available, 153436k reserved, 270336K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)                                                                                                                                           
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)                                                                                                                                           
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)                                                                                                                                           
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)                                                                                                                                           
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)                                                                                                                                           
[    0.000000]       .text : 0xc0008000 - 0xc086975c   (8582 kB)                                                                                                                                           
[    0.000000]       .init : 0xc086a000 - 0xc08a2e00   ( 228 kB)                                                                                                                                           
[    0.000000]       .data : 0xc08a4000 - 0xc09181b8   ( 465 kB)                                                                                                                                           
[    0.000000]        .bss : 0xc09181dc - 0xc0ae7c18   (1855 kB)                                                                                                                                           
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1                                                                                                                     
[    0.000000] Preemptible hierarchical RCU implementation.                                                                                                                                                
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.                                                                                                                                     
[    0.000000]  Additional per-CPU info printed with stalls.                                                                                                                                               
[    0.000000] NR_IRQS:192                                                                                                                                                                                 
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] start_kernel(): bug: interrupts were enabled early
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.013717] Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
[    0.075992] pid_max: default: 32768 minimum: 301
[    0.079671] Mount-cache hash table entries: 512
[    0.083897] Initializing cgroup subsys cpuacct
[    0.087235] Initializing cgroup subsys memory
[    0.090670] Initializing cgroup subsys devices
[    0.094115] Initializing cgroup subsys freezer
[    0.097350] Initializing cgroup subsys blkio
[    0.101034] Initializing cgroup subsys perf_event
[    0.104623] CPU: Testing write buffer coherency: ok
[    0.109814] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.116931] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.122482] Setting up static identity map for 0x405d89b0 - 0x405d8a08
[    0.238520] CPU1: Booted secondary processor
[    0.297370] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.299367] Brought up 2 CPUs
[    0.304706] SMP: Total of 2 processors activated (3824.02 BogoMIPS).
[    0.307937] devtmpfs: initialized
[    0.313432] dummy: 
[    0.317121] NET: Registered protocol family 16
[    0.323371] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.331051] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.335947] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.339114] [ccu-inf] aw clock manager init
[    0.341395] [ccu-inf] aw_ccu_init
[    0.345362] [ccu-inf] script config pll3 to 297MHz
[    0.349126] [ccu-inf] script config pll4 to 300MHz
[    0.352884] [ccu-inf] script config pll6 to 600MHz
[    0.356658] [ccu-inf] script config pll7 to 297MHz
[    0.360416] [ccu-inf] script config pll8 to 336MHz
[    0.363175] Init eGon pin module V2.0
[    0.372588] bio: create slab <bio-0> at 0
[    0.376113] sunxi_gpio driver init ver 1.3
[    0.382439] gpiochip_add: registered GPIOs 1 to 88 on device: A1X_GPIO
[    0.385569] SCSI subsystem initialized
[    0.388423] libata version 3.00 loaded.
[    0.393120] usbcore: registered new interface driver usbfs
[    0.397469] usbcore: registered new interface driver hub
[    0.401620] usbcore: registered new device driver usb
[    0.404771] Linux media interface: v0.10
[    0.408394] Linux video capture interface: v2.00
[    0.414124] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.419377] Switching to clocksource arch_sys_counter
[    0.421518] FS-Cache: Loaded
[    0.423701] CacheFiles: Loaded
[    0.434807] cfg80211: Calling CRDA to update world regulatory domain
[    0.456283] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[    0.463003] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[    0.468890] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.475082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.478780] usb usb1: Product: sw_hcd host driver
[    0.483489] usb usb1: Manufacturer: Linux 3.4.105+ sw_hcd-hcd
[    0.487086] usb usb1: SerialNumber: sw_hcd_host0
[    0.490378] hub 1-0:1.0: USB hub found
[    0.493323] hub 1-0:1.0: 1 port detected
[    0.497721] NET: Registered protocol family 2
[    0.514247] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.521164] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.528620] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.535197] TCP: Hash tables configured (established 131072 bind 65536)
[    0.537398] TCP: reno registered
[    0.542284] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.547651] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.551283] NET: Registered protocol family 1
[    0.556661] RPC: Registered named UNIX socket transport module.
[    0.560342] RPC: Registered udp transport module.
[    0.564057] RPC: Registered tcp transport module.
[    0.569460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.574992] audit: initializing netlink socket (disabled)
[    0.578730] type=2000 audit(0.550:1): initialized
[    0.582901] highmem bounce pool size: 64 pages
[    0.594383] VFS: Disk quotas dquot_6.5.2
[    0.599883] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.606931] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.611560] NFS: Registering the id_resolver key type
[    0.616196] NTFS driver 2.1.30 [Flags: R/W].
[    0.619590] fuse init (API version 7.18)
[    0.623080] msgmni has been set to 1220
[    0.630241] alg: No test for stdrng (krng)
[    0.636973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.639892] io scheduler noop registered
[    0.644082] io scheduler deadline registered (default)
[    0.646922] io scheduler cfq registered
[    0.651693] sunxi disp driver loaded (/dev/disp api 1.0)
[    0.657366] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[    0.665573] [uart]: used uart info.: 0x8d
[    0.670279] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[    0.696583] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[    1.362497] console [ttyS0] enabled
[    1.370861] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
[    1.402712] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[    1.414533] [uart]: serial probe 3 irq 36 mapbase 0x01c28c00
[    1.446361] sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
[    1.458163] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
[    1.489979] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
[    1.499509] G2D: drv_g2d_init
[    1.504245] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
[    1.513239] G2D: head:c9000000,tail:ca000000
[    1.520857] G2D: Module initialized.major:250
[    1.533845] brd: module loaded
[    1.542601] loop: module loaded
[    1.549592] gpio count < =0 ,gpio_count is: 0
[    1.559920] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[    1.571174] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[    1.583935] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    1.598836] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc 
[    1.609611] scsi0 : sw_ahci_platform
[    1.620401] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    1.632321] Fixed MDIO Bus: probed
[    1.640427] eth%d: device MAC address 02:45:08:42:54:c5
[    1.648633] gmac_para gpio count is 18
[    1.653846] [gmac]: sun6i_gmac platform driver registration completed
[    1.657140] PPP generic driver version 2.4.2
[    1.665345] PPP BSD Compression module registered
[    1.674082] PPP Deflate Compression module registered
[    1.682533] NET: Registered protocol family 24
[    1.692884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.704643] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.713231] [sw-ehci1]: open clock
[    1.735851] [sw-ehci1]: Set USB Power ON
[    1.742287] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.755983] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[    1.767433] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[    1.793839] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[    1.801859] ehci_irq: port change detect
[    1.807723] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.820704] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.834371] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.846390] usb usb2: Manufacturer: Linux 3.4.105+ ehci_hcd
[    1.855106] usb usb2: SerialNumber: sw-ehci
[    1.862521] hub 2-0:1.0: USB hub found
[    1.869169] hub 2-0:1.0: 1 port detected
[    1.875671] [sw-ohci1]: open clock
[    1.901767] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.915120] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[    1.926485] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[    1.973841] ata1: SATA link down (SStatus 0 SControl 300)
[    1.999303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.012296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.025622] usb usb3: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.037290] usb usb3: Manufacturer: Linux 3.4.105+ ohci_hcd
[    2.046008] usb usb3: SerialNumber: sw-ohci
[    2.053400] hub 3-0:1.0: USB hub found
[    2.060043] hub 3-0:1.0: 1 port detected
[    2.066607] [sw-ehci2]: open clock
[    2.089288] [sw-ehci2]: Set USB Power ON
[    2.095723] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.109457] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[    2.120890] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[    2.194888] usb 2-1: new high-speed USB device number 2 using sw-ehci
[    2.213842] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[    2.225055] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.238038] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.251707] usb usb4: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.263727] usb usb4: Manufacturer: Linux 3.4.105+ ehci_hcd
[    2.272447] usb usb4: SerialNumber: sw-ehci
[    2.279846] hub 4-0:1.0: USB hub found
[    2.286524] hub 4-0:1.0: 1 port detected
[    2.293020] [sw-ohci2]: open clock
[    2.319116] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.332472] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
[    2.343842] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[    2.365705] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[    2.378515] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.388628] usb 2-1: Product: USB 2.0 Hub
[    2.395895] hub 2-1:1.0: USB hub found
[    2.402766] hub 2-1:1.0: 4 ports detected
[    2.412501] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.425443] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.438734] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.450376] usb usb5: Manufacturer: Linux 3.4.105+ ohci_hcd
[    2.459069] usb usb5: SerialNumber: sw-ohci
[    2.465940] hub 5-0:1.0: USB hub found
[    2.472550] hub 5-0:1.0: 1 port detected
[    2.480295] Initializing USB Mass Storage driver...
[    2.490124] usbcore: registered new interface driver usb-storage
[    2.499685] USB Mass Storage support registered.
[    2.508810] mousedev: PS/2 mouse device common for all mice
[    2.518978] input: sunxi-ir as /devices/virtual/input/input0
[    2.525939] IR Initial OK
[    2.531640] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[    2.540274] i2c /dev entries driver
[    2.547579] config i2c gpio with gpio_config api
[    2.553195] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[    2.564357] axp_mfd 0-0034: AXP internal temperature monitoring enabled
[    2.576065] [AXP]axp driver uning configuration failed(342)
[    2.577993] [AXP]power_start = 0
[    2.581055] I2C: i2c-0: AW16XX I2C adapter
[    2.588565] config i2c gpio with gpio_config api
[    2.591909] I2C: i2c-1: AW16XX I2C adapter
[    2.599409] config i2c gpio with gpio_config api
[    2.602744] I2C: i2c-2: AW16XX I2C adapter
[    2.610215] config i2c gpio with gpio_config api
[    2.613529] I2C: i2c-3: AW16XX I2C adapter
[    2.619417] [ace_drv] start!!!
[    2.622017] [ace_drv] init end!!!
[    2.623731] [pa_drv] start!!!
[    2.626117] [pa_drv] init end!!!
[    2.630210] Driver for 1-wire Dallas network protocol.
[    2.639593] invalid gpio pin in fex configuration : -1
[    2.647157] axp20_ldo1: 1300 mV 
[    2.655595] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV 
[    2.665933] axp20_ldo3: 700 <--> 3500 mV at 2800 mV 
[    2.676075] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV 
[    2.686470] axp20_buck2: 700 <--> 2275 mV at 1450 mV 
[    2.696679] axp20_buck3: 700 <--> 3500 mV at 1300 mV 
[    2.706590] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV 
[    2.721352] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
[    2.749682] axp20_ldo2: Failed to create debugfs directory
[    2.760177] device-mapper: uevent: version 1.0.3
[    2.772637] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.784420] cpuidle: using governor ladder
[    2.791399] cpuidle: using governor menu
[    2.797683] [mmc-msg] sw_mci_init
[    2.806743] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
[    2.819292] usb 2-1.1: new full-speed USB device number 3 using sw-ehci
[    2.824165] [mmc-msg] sdc0 set round clock 400000, src 24000000
[    2.844655] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    2.860811] [mmc-msg] sdc0 Probe: base:0xf0154000 irq:64 sg_cpu:f0156000(4fc00000) ret 0.
[    2.873499] [mmc_pm]: failed to fetch sdio card configuration!
[    2.875974] sunxi_leds driver init
[    2.883438] Registered led device: green:ph24:led1
[    2.888461] ledtrig-cpu: registered to indicate activity on CPUs
[    2.900966] usbcore: registered new interface driver usbhid
[    2.909382] usbhid: USB HID core driver
[    2.915891] ashmem: initialized
[    2.922659] logger: created 256K log 'log_main'
[    2.931047] logger: created 256K log 'log_events'
[    2.939470] logger: created 256K log 'log_radio'
[    2.947882] logger: created 256K log 'log_system'
[    2.958535] IPv4 over IPv4 tunneling driver
[    2.965553] TCP: bic registered
[    2.970974] TCP: cubic registered
[    2.976844] TCP: westwood registered
[    2.983056] TCP: highspeed registered
[    2.988887] usb 2-1.1: New USB device found, idVendor=24ae, idProduct=1001
[    3.005633] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.018059] usb 2-1.1: Product: Rapoo 2.4G Wireless Touch Desktop 
[    3.027879] usb 2-1.1: Manufacturer: MOSART Semi.
[    3.043678] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  as /devices/platform/sw-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
[    3.068952] generic-usb 0003:24AE:1001.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-sw-ehci-1.1/input0
[    3.094223] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop  as /devices/platform/sw-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
[    3.119921] generic-usb 0003:24AE:1001.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-sw-ehci-1.1/input1
[    3.136870] TCP: hybla registered
[    3.142395] TCP: htcp registered
[    3.147891] TCP: vegas registered
[    3.153402] TCP: veno registered
[    3.159156] TCP: scalable registered
[    3.164753] TCP: lp registered
[    3.169989] TCP: yeah registered
[    3.175757] TCP: illinois registered
[    3.182551] Initializing XFRM netlink socket
[    3.190912] NET: Registered protocol family 10
[    3.199913] NET: Registered protocol family 17
[    3.205487] usb 2-1.2: new high-speed USB device number 4 using sw-ehci
[    3.220018] NET: Registered protocol family 15
[    3.229143] [mmc_pm]: No sdio card, please check your config !!
[    3.232813] Registering the dns_resolver key type
[    3.239594] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    3.255845] Registering SWP/SWPB emulation handler
[    3.265264] axp20_buck2: Failed to create debugfs directory
[    3.277002] [cpu_freq] INF:-------------------V-F Table-------------------
[    3.288953] [cpu_freq] INF:  voltage = 1450mv        frequency = 1008MHz
[    3.300251] [cpu_freq] INF:  voltage = 1425mv        frequency =  912MHz
[    3.311448] [cpu_freq] INF:  voltage = 1350mv        frequency =  864MHz
[    3.322602] [cpu_freq] INF:  voltage = 1250mv        frequency =  720MHz
[    3.333805] [cpu_freq] INF:  voltage = 1150mv        frequency =  528MHz
[    3.345000] [cpu_freq] INF:  voltage = 1100mv        frequency =  312MHz
[    3.356197] [cpu_freq] INF:  voltage = 1050mv        frequency =  144MHz
[    3.367393] [cpu_freq] INF:  voltage = 1000mv        frequency =    0MHz
[    3.379371] [cpu_freq] INF:-----------------------------------------------
[    3.396041] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
[    3.412883] usb 2-1.2: New USB device found, idVendor=152d, idProduct=2329
[    3.415935] registered taskstats version 1
[    3.425681] I2C: i2c-4: HDMI I2C adapter
[    3.439973] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    3.451474] usb 2-1.2: Product: USB to ATA/ATAPI bridge
[    3.459940] usb 2-1.2: Manufacturer: JMicron
[    3.467874] usb 2-1.2: SerialNumber: 144036404688
[    3.479555] usb-storage 2-1.2:1.0: Quirks match for vid 152d pid 2329: 8020
[    3.502506] scsi1 : usb-storage 2-1.2:1.0
[    3.605196] usb 2-1.3: new high-speed USB device number 5 using sw-ehci
[    3.727128] usb 2-1.3: New USB device found, idVendor=0846, idProduct=9021
[    3.740280] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.751241] usb 2-1.3: Product: NETGEAR WNA3100M
[    3.759091] usb 2-1.3: Manufacturer: Realtek
[    3.767025] usb 2-1.3: SerialNumber: 00e04c000001
[    3.800707] ParseEDID
[    3.811221] EDID version: 1.3
[    3.820133] PCLK=106500000 X 1440 1520 1672 1904 Y 900 903 909 934 fr 59 NP
[    3.836025] [mmc-msg] mmc 0 detect change, present 1
[    3.844848] Using above mode as preferred EDID mode
[    3.865152] usb 2-1.4: new low-speed USB device number 6 using sw-ehci
[    3.874199] Unimplemented SVD code 4
[    3.880375] Unimplemented SVD code 22
[    3.886637] Unimplemented SVD code 17
[    3.892891] Unimplemented SVD code 21
[    3.899067] Unimplemented SVD code 2
[    3.905148] Unimplemented SVD code 6
[    3.911323] Unimplemented SVD code 15
[    3.920792] disp_clk: Could not find a matching pll-freq for 53900000 pclk
[    3.933560] disp_clk: Could not find a matching pll-freq for 108100000 pclk
[    3.946329] disp_clk: Could not find a matching pll-freq for 25150000 pclk
[    3.959011] disp_clk: Could not find a matching pll-freq for 53900000 pclk
[    3.971692] disp_clk: Could not find a matching pll-freq for 72650000 pclk
[    3.984374] disp_clk: Could not find a matching pll-freq for 78800000 pclk
[    3.997056] disp_clk: Could not find a matching pll-freq for 26150000 pclk
[    4.007571] Parse_VideoData_Block: VIC 16 support
[    4.016696] Parse_VideoData_Block: VIC 31 (native) support
[    4.025822] Parse_VideoData_Block: VIC 20 support
[    4.034080] Parse_VideoData_Block: VIC 5 support
[    4.042250] Parse_VideoData_Block: VIC 4 support
[    4.050508] Parse_VideoData_Block: VIC 19 support
[    4.058853] Parse_VideoData_Block: VIC 18 support
[    4.067187] Parse_VideoData_Block: VIC 22 support
[    4.075532] Parse_VideoData_Block: VIC 17 support
[    4.083876] Parse_VideoData_Block: VIC 21 support
[    4.092134] Parse_VideoData_Block: VIC 3 support
[    4.100305] Parse_VideoData_Block: VIC 7 support
[    4.108476] Parse_VideoData_Block: VIC 2 support
[    4.116637] Parse_VideoData_Block: VIC 6 support
[    4.124808] Parse_VideoData_Block: VIC 1 support
[    4.132979] Parse_AudioData_Block: max channel=2
[    4.141496] Parse_AudioData_Block: SampleRate code=f
[    4.150157] Parse_AudioData_Block: WordLen code=3
[    4.158358] Find HDMI Vendor Specific DataBlock
[    4.168729] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[    4.181442] PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
[    4.193806] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[    4.205824] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
[    4.217955] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[    4.232279] waited 780 ms for EDID info
[    4.242662] disp clks: lcd 106500000 pre_scale 1 hdmi 106500000 pll 213000000 2x 0
[    4.270994] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c517
[    4.284172] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.294754] usb 2-1.4: Product: USB Receiver
[    4.302334] usb 2-1.4: Manufacturer: Logitech
[    4.319817] input: Logitech USB Receiver as /devices/platform/sw-ehci.1/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
[    4.341681] logitech 0003:046D:C517.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-sw-ehci-1.4/input0
[    4.361311] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    4.373236] [mmc-msg] sdc0 power on
[    4.388136] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor
[    4.404525] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    4.425637] input: Logitech USB Receiver as /devices/platform/sw-ehci.1/usb2/2-1/2-1.4/2-1.4:1.1/input/input5
[    4.440523] [mmc-msg] sdc0 set round clock 400000, src 24000000
[    4.463564] logitech 0003:046D:C517.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-sw-ehci-1.4/input1
[    4.508048] scsi 1:0:0:0: Direct-Access     SanDisk  SDSSDP064G            PQ: 0 ANSI: 2 CCS
[    4.526227] sd 1:0:0:0: [sda] 123091920 512-byte logical blocks: (63.0 GB/58.6 GiB)
[    4.538575] sd 1:0:0:0: [sda] Write Protect is off
[    4.547417] sd 1:0:0:0: [sda] Mode Sense: 28 00 00 00
[    4.552592] sd 1:0:0:0: [sda] No Caching mode page found
[    4.563006] sd 1:0:0:0: [sda] Assuming drive cache: write through
[    4.573256] [mmc-err] smc 0 err, cmd 52,  RTO
[    4.581760] [mmc-err] smc 0 err, cmd 52,  RTO
[    4.594604] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    4.610588] sd 1:0:0:0: [sda] No Caching mode page found
[    4.618932] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    4.636823] [mmc-err] smc 0 err, cmd 5,  RTO
[    4.644302] [mmc-err] smc 0 err, cmd 5,  RTO
[    4.651780] [mmc-err] smc 0 err, cmd 5,  RTO
[    4.659258] [mmc-err] smc 0 err, cmd 5,  RTO
[    4.671850] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    4.689568] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    4.707286] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    4.721923] sd 1:0:0:0: [sda] Assuming drive cache: write through
[    4.730222]  sda: sda1
[    4.740210] sd 1:0:0:0: [sda] No Caching mode page found
[    4.753771] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    4.773407] sd 1:0:0:0: [sda] Assuming drive cache: write through
[    4.781835] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    4.802525] [mmc-msg] sdc0 set round clock 42857143, src 600000000
[    4.812289] sd 1:0:0:0: [sda] Attached SCSI disk
[    4.860704] ParseEDID
[    4.882957] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[    4.894353] EDID version: 1.3
[    4.903215] PCLK=106500000 X 1440 1520 1672 1904 Y 900 903 909 934 fr 59 NP
[    4.930184] Unimplemented SVD code 4
[    4.936389] Unimplemented SVD code 22
[    4.942675] Unimplemented SVD code 17
[    4.948952] Unimplemented SVD code 21
[    4.957035] mmc0: new high speed SDHC card at address 0007
[    4.965163] Unimplemented SVD code 2
[    4.971275] Unimplemented SVD code 6
[    4.974671] mmcblk0: mmc0:0007 SD8GB 7.42 GiB 
[    4.985384] Unimplemented SVD code 15
[    4.987134]  mmcblk0: p1 p2
[    4.999513] disp_clk: Could not find a matching pll-freq for 53900000 pclk
[    5.012362] disp_clk: Could not find a matching pll-freq for 108100000 pclk
[    5.025173] disp_clk: Could not find a matching pll-freq for 25150000 pclk
[    5.037930] disp_clk: Could not find a matching pll-freq for 53900000 pclk
[    5.050646] disp_clk: Could not find a matching pll-freq for 72650000 pclk
[    5.063358] disp_clk: Could not find a matching pll-freq for 78800000 pclk
[    5.081347] disp_clk: Could not find a matching pll-freq for 26150000 pclk
[    5.091913] Parse_VideoData_Block: VIC 16 support
[    5.101062] Parse_VideoData_Block: VIC 31 (native) support
[    5.110211] Parse_VideoData_Block: VIC 20 support
[    5.118494] Parse_VideoData_Block: VIC 5 support
[    5.126688] Parse_VideoData_Block: VIC 4 support
[    5.134968] Parse_VideoData_Block: VIC 19 support
[    5.143336] Parse_VideoData_Block: VIC 18 support
[    5.151695] Parse_VideoData_Block: VIC 22 support
[    5.160060] Parse_VideoData_Block: VIC 17 support
[    5.168427] Parse_VideoData_Block: VIC 21 support
[    5.176708] Parse_VideoData_Block: VIC 3 support
[    5.184901] Parse_VideoData_Block: VIC 7 support
[    5.193143] Parse_VideoData_Block: VIC 2 support
[    5.196715] Parse_VideoData_Block: VIC 6 support
[    5.200292] Parse_VideoData_Block: VIC 1 support
[    5.203890] Parse_AudioData_Block: max channel=2
[    5.207814] Parse_AudioData_Block: SampleRate code=f
[    5.211477] Parse_AudioData_Block: WordLen code=3
[    5.213400] Console: switching 
[    5.216885] Find HDMI Vendor Specific DataBlock
[    5.220195] to colour frame buffer device 180x56
[    5.226031] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[    5.231885] PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
[    5.237406] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[    5.242895] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
[    5.312612] axp20_buck3: incomplete constraints, leaving on
[    5.323136] axp20_buck2: incomplete constraints, leaving on
[    5.333553] axp20_ldo4: incomplete constraints, leaving on
[    5.343879] axp20_ldo3: incomplete constraints, leaving on
[    5.354202] axp20_ldo2: incomplete constraints, leaving on
[    5.363062] console [netcon0] enabled
[    5.370310] netconsole: network logging started
[    5.384437] otg_wakelock_init: No USB transceiver found
[    5.397320] sunxi-rtc sunxi-rtc: setting system clock to 2015-01-22 18:18:58 UTC (1421950738)
[    5.408107] ALSA device list:
[    5.417366]   #0: sunxi-CODEC  Audio Codec
[    5.426832]   #1: sunxi-sndhdmi
[    5.439288] md: Waiting for all devices to be available before autodetect
[    5.454213] md: If you don't use raid, use raid=noautodetect
[    5.467140] md: Autodetecting RAID arrays.
[    5.478112] md: Scanned 0 and added 0 devices.
[    5.487801] md: autorun ...
[    5.496326] md: ... autorun DONE.
[    5.533431] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.549686] VFS: Mounted root (ext4 filesystem) on device 8:1.
[    5.566957] devtmpfs: mounted
[    5.576499] Freeing init memory: 224K
[    6.100802] ParseEDID
[    6.129734] EDID version: 1.3
[    6.142942] PCLK=106500000 X 1440 1520 1672 1904 Y 900 903 909 934 fr 59 NP
[    6.180231] Unimplemented SVD code 4
[    6.182917] Unimplemented SVD code 22
[    6.185609] Unimplemented SVD code 17
[    6.188258] Unimplemented SVD code 21
[    6.190818] Unimplemented SVD code 2
[    6.193434] Unimplemented SVD code 6
[    6.196087] Unimplemented SVD code 15
[    6.201959] disp_clk: Could not find a matching pll-freq for 53900000 pclk
[    6.208014] disp_clk: Could not find a matching pll-freq for 108100000 pclk
[    6.213875] disp_clk: Could not find a matching pll-freq for 25150000 pclk
[    6.219898] disp_clk: Could not find a matching pll-freq for 53900000 pclk
[    6.225847] disp_clk: Could not find a matching pll-freq for 72650000 pclk
[    6.231750] disp_clk: Could not find a matching pll-freq for 78800000 pclk
[    6.237650] disp_clk: Could not find a matching pll-freq for 26150000 pclk
[    6.244268] disp clks: lcd 106500000 pre_scale 1 hdmi 106500000 pll 213000000 2x 0
[    6.251124] disp clks: lcd 106500000 pre_scale 1 hdmi 106500000 pll 213000000 2x 0
[    6.434524] Parse_VideoData_Block: VIC 16 support
[    6.448349] Parse_VideoData_Block: VIC 31 (native) support
[    6.462145] Parse_VideoData_Block: VIC 20 support
[    6.475039] Parse_VideoData_Block: VIC 5 support
[    6.487835] Parse_VideoData_Block: VIC 4 support
[    6.500722] Parse_VideoData_Block: VIC 19 support
[    6.513712] Parse_VideoData_Block: VIC 18 support
[    6.526549] Parse_VideoData_Block: VIC 22 support
[    6.539610] Parse_VideoData_Block: VIC 17 support
[    6.552331] Parse_VideoData_Block: VIC 21 support
[    6.564875] Parse_VideoData_Block: VIC 3 support
[    6.577244] Parse_VideoData_Block: VIC 7 support
[    6.589566] Parse_VideoData_Block: VIC 2 support
[    6.601766] Parse_VideoData_Block: VIC 6 support
[    6.614014] Parse_VideoData_Block: VIC 1 support
[    6.626149] Parse_AudioData_Block: max channel=2
[    6.638702] Parse_AudioData_Block: SampleRate code=f
[    6.651771] Parse_AudioData_Block: WordLen code=3
[    6.663971] Find HDMI Vendor Specific DataBlock
[    6.678296] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
[    6.695416] PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
[    6.711843] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[    6.727767] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
[    6.779367] udevd[172]: starting version 175
[    7.979842] usbcore: registered new interface driver rtl8192cu
[    9.196221] EXT4-fs (sda1): re-mounted. Opts: (null)
[    9.540621] 8021q: 802.1Q VLAN Support v1.8
[    9.630010] usbcore: registered new interface driver r8188eu
[   11.882333] Adding 524284k swap on /swapfile1.  Priority:-1 extents:8 across:868348k 
[   14.449737] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.471623] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.541807] disp clks: lcd 106500000 pre_scale 1 hdmi 106500000 pll 213000000 2x 0
[   17.265150] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.047158] disp clks: lcd 106500000 pre_scale 1 hdmi 106500000 pll 213000000 2x 0
[   19.487175] disp clks: lcd 106500000 pre_scale 1 hdmi 106500000 pll 213000000 2x 0
[   27.663051] wlan0: no IPv6 routers present
[   28.087677] GMAC gpio_power_hd:gpio_direction_output
[   28.303396] eth0: device MAC address 02:45:08:42:54:c5
[   28.326255] sunxi_gmac: probed
[   28.334722] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[   28.346092] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[   33.353591] PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
[   38.453667] eth0: no IPv6 routers present
[   38.539537] GMAC gpio_power_hd:gpio_direction_output
[   38.811738] eth0: device MAC address 02:45:08:42:54:c5
[   38.835573] sunxi_gmac: probed
[   38.844039] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[   38.855342] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[   38.882018] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   39.261712] GMAC gpio_power_hd:gpio_direction_output
[   39.534734] eth0: device MAC address 02:45:08:42:54:c5
[   39.558511] sunxi_gmac: probed
[   39.567036] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[   39.579057] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[   39.605203] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   45.584358] PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
[   45.597607] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Mais je ne peux rien faire de plus
Ceci dit, si j'ai une idée je reviens te voir !

[Clemzo]

je te remercie, je vais analyser tout ça et reviendrai après.

[Gaara]

Tu peux peut-être essayer d'utiliser un logiciel de comparaison de fichier pour voir les différences.
Sur Ubuntu, j'utilise Meld: https://doc.ubuntu-fr.org/meld
Sur windoxs ça devrait exister aussi, mais là, je n'ai pas de nom à te proposer

[Clemzo]

Je te remercie, mais je n'ai pas de connexion ethernet soit pour aller chercher le soft, soit pour extraire le fichier.
A la rigueur je peux essayer avec une clé usb.

[Gaara]

Bonjour, je viens de lire par hasard ce fil qui pourrait t'intéresser: https://lists.debian.org/debian-arm/201 ... 00009.html
C'est un problème similaire avec un BananaPi, posté sur le "debian arm mailing list".
Je ne comprend pas trop le système de ce forum mais il parle d'alimentation ? Utilises-tu une alim 2A ?

[Clemzo]

Bonjour,

Oui absolument, j'utilise l'alimentation 2A, proposée dans le kit vendu en complément.
Je peux tenter un démarrage avec une alimentation 5A afin d'en avoir le cœur net.

Mais plus j'avance et plus je m'oriente vers un chip HS.

Dans tous les cas, merci pour ce complément d'informations assez technique que j'approfondirai des que possible.