Voici les tests que Dyox m'avait demandé de faire :
Code : Tout sélectionner
~> dmesg -e
[janv. 5 12:23] Booting Linux on physical CPU 0x0
[ +0,000000] Linux version 5.15.76-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1597 SMP Fri Nov 4 12:13:17 GMT 2022
[ +0,000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ +0,000000] CPU: div instructions available: patching division code
[ +0,000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ +0,000000] OF: fdt: Machine model: Raspberry Pi 3 Model A Plus Rev 1.0
[ +0,000000] random: crng init done
[ +0,000000] Memory policy: Data cache writealloc
[ +0,000000] Reserved memory: created CMA memory pool at 0x17c00000, size 64 MiB
[ +0,000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ +0,000000] Zone ranges:
[ +0,000000] DMA [mem 0x0000000000000000-0x000000001bffffff]
[ +0,000000] Normal empty
[ +0,000000] Movable zone start for each node
[ +0,000000] Early memory node ranges
[ +0,000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
[ +0,000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
[ +0,000000] percpu: Embedded 16 pages/cpu s35724 r8192 d21620 u65536
[ +0,000000] pcpu-alloc: s35724 r8192 d21620 u65536 alloc=16*4096
[ +0,000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ +0,000000] Built 1 zonelists, mobility grouping on. Total pages: 113680
[ +0,000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=9cba179a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles net.ifnames=0 ip=169.254.1.1
[ +0,000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ +0,000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ +0,000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ +0,000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ +0,000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ +0,000000] Memory: 370980K/458752K available (10240K kernel code, 1337K rwdata, 3080K rodata, 1024K init, 569K bss, 22236K reserved, 65536K cma-reserved)
[ +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ +0,000000] ftrace: allocating 33307 entries in 98 pages
[ +0,000000] ftrace: allocated 98 pages with 3 groups
[ +0,000000] trace event string verifier disabled
[ +0,000000] rcu: Hierarchical RCU implementation.
[ +0,000000] Rude variant of Tasks RCU enabled.
[ +0,000000] Tracing variant of Tasks RCU enabled.
[ +0,000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ +0,000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ +0,000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ +0,000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ +0,000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ +0,000020] Switching to timer-based delay loop, resolution 52ns
[ +0,000401] Console: colour dummy device 80x30
[ +0,000072] printk: console [tty1] enabled
[ +0,000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ +0,000030] pid_max: default: 32768 minimum: 301
[ +0,000160] LSM: Security Framework initializing
[ +0,000227] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ +0,000025] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ +0,001532] cgroup: Disabling memory control group subsystem
[ +0,000284] CPU: Testing write buffer coherency: ok
[ +0,000536] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ +0,001478] Setting up static identity map for 0x100000 - 0x10003c
[ +0,000189] rcu: Hierarchical SRCU implementation.
[ +0,000989] smp: Bringing up secondary CPUs ...
[ +0,001157] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ +0,001307] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ +0,001209] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ +0,000161] smp: Brought up 1 node, 4 CPUs
[ +0,000083] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ +0,000019] CPU: All CPU(s) started in HYP mode.
[ +0,000011] CPU: Virtualization extensions available.
[ +0,000847] devtmpfs: initialized
[ +0,018614] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ +0,000228] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ +0,000037] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ +0,003250] pinctrl core: initialized pinctrl subsystem
[ +0,001354] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ +0,004823] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ +0,005568] audit: initializing netlink subsys (disabled)
[ +0,000298] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ +0,000634] thermal_sys: Registered thermal governor 'step_wise'
[ +0,001274] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ +0,000020] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ +0,000267] Serial: AMBA PL011 UART driver
[ +0,007855] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ +0,025059] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:10:35, variant start
[ +0,010016] raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee
[ +0,049689] Kprobes globally optimized
[ +0,005445] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ +0,002229] SCSI subsystem initialized
[ +0,000275] usbcore: registered new interface driver usbfs
[ +0,000065] usbcore: registered new interface driver hub
[ +0,000072] usbcore: registered new device driver usb
[ +0,000315] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ +0,000198] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ +0,000268] pps_core: LinuxPPS API ver. 1 registered
[ +0,000015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ +0,000030] PTP clock support registered
[ +0,002588] clocksource: Switched to clocksource arch_sys_counter
[ +0,070725] VFS: Disk quotas dquot_6.6.0
[ +0,000120] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ +0,000205] FS-Cache: Loaded
[ +0,000287] CacheFiles: Loaded
[ +0,011086] NET: Registered PF_INET protocol family
[ +0,000223] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ +0,001299] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ +0,000046] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ +0,000028] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ +0,000073] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ +0,000108] TCP: Hash tables configured (established 4096 bind 4096)
[ +0,000138] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ +0,000043] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ +0,000272] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ +0,006373] RPC: Registered named UNIX socket transport module.
[ +0,000017] RPC: Registered udp transport module.
[ +0,000013] RPC: Registered tcp transport module.
[ +0,000012] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ +1,657039] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ +0,003821] Initialise system trusted keyrings
[ +0,000357] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ +0,009981] zbud: loaded
[ +0,002081] FS-Cache: Netfs 'nfs' registered for caching
[ +0,001016] NFS: Registering the id_resolver key type
[ +0,000065] Key type id_resolver registered
[ +0,000014] Key type id_legacy registered
[ +0,000143] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ +0,000016] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ +0,001277] Key type asymmetric registered
[ +0,000017] Asymmetric key parser 'x509' registered
[ +0,000098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ +0,000017] io scheduler mq-deadline registered
[ +0,000015] io scheduler kyber registered
[ +0,004800] bcm2708_fb soc:fb: FB found 1 display(s)
[ +0,007631] Console: switching to colour frame buffer device 82x26
[ +0,004940] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416
[ +0,005734] bcm2835-rng 3f104000.rng: hwrng registered
[ +0,000470] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ +0,001196] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ +0,012539] brd: module loaded
[ +0,009843] loop: module loaded
[ +0,000658] Loading iSCSI transport class v2.0-870.
[ +0,001914] usbcore: registered new interface driver lan78xx
[ +0,000070] usbcore: registered new interface driver smsc95xx
[ +0,000028] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ +0,728243] Core Release: 2.80a
[ +0,000021] Setting default values for core params
[ +0,000032] Finished setting default values for core params
[ +0,200355] Using Buffer DMA mode
[ +0,000013] Periodic Transfer Interrupt Enhancement - disabled
[ +0,000013] Multiprocessor Interrupt Enhancement - disabled
[ +0,000013] OTG VER PARAM: 0, OTG VER FLAG: 0
[ +0,000049] Dedicated Tx FIFOs mode
[ +0,000796] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 97d14000 dma = 0xd7d14000 len=9024
[ +0,000043] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ +0,000021] dwc_otg: Microframe scheduler enabled
[ +0,000135] WARN::hcd_init_fiq:457: FIQ on core 1
[ +0,000019] WARN::hcd_init_fiq:458: FIQ ASM at 807fb38c length 36
[ +0,000021] WARN::hcd_init_fiq:497: MPHI regs_base at 9c810000
[ +0,000023] dwc_otg 3f980000.usb: DWC OTG Controller
[ +0,000042] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ +0,000051] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[ +0,000059] Init: Port Power? op_state=1
[ +0,000012] Init: Power Port (0)
[ +0,000364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ +0,000025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0,000019] usb usb1: Product: DWC OTG Controller
[ +0,000017] usb usb1: Manufacturer: Linux 5.15.76-v7+ dwc_otg_hcd
[ +0,000017] usb usb1: SerialNumber: 3f980000.usb
[ +0,000776] hub 1-0:1.0: USB hub found
[ +0,000069] hub 1-0:1.0: 1 port detected
[ +0,000872] dwc_otg: FIQ enabled
[ +0,000014] dwc_otg: NAK holdoff enabled
[ +0,000012] dwc_otg: FIQ split-transaction FSM enabled
[ +0,000018] Module dwc_common_port init
[ +0,000327] usbcore: registered new interface driver usb-storage
[ +0,000239] mousedev: PS/2 mouse device common for all mice
[ +0,003486] sdhci: Secure Digital Host Controller Interface driver
[ +0,000016] sdhci: Copyright(c) Pierre Ossman
[ +0,000425] sdhci-pltfm: SDHCI platform and OF driver helper
[ +0,002691] ledtrig-cpu: registered to indicate activity on CPUs
[ +0,000342] hid: raw HID events driver (C) Jiri Kosina
[ +0,000154] usbcore: registered new interface driver usbhid
[ +0,000016] usbhid: USB HID core driver
[ +0,005057] Initializing XFRM netlink socket
[ +0,000054] NET: Registered PF_PACKET protocol family
[ +0,000193] Key type dns_resolver registered
[ +0,000944] Registering SWP/SWPB emulation handler
[ +0,000709] registered taskstats version 1
[ +0,000032] Loading compiled-in X.509 certificates
[ +0,000831] Key type ._fscrypt registered
[ +0,000017] Key type .fscrypt registered
[ +0,000013] Key type fscrypt-provisioning registered
[ +0,011721] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ +0,000180] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[ +0,002656] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ +0,000453] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ +0,001791] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ +0,000023] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ +0,027937] sdhost: log_buf @ d3a4b045 (d7d13000)
[ +0,053246] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ +0,017618] Indeed it is in host mode hprt0 = 00021501
[ +0,005145] of_cfs_init
[ +0,000167] of_cfs_init: OK
[ +0,037580] mmc0: host does not support reading read-only switch, assuming write-enable
[ +0,003794] mmc0: new high speed SDHC card at address 59b4
[ +0,000660] mmc1: new high speed SDIO card at address 0001
[ +0,000526] mmcblk0: mmc0:59b4 USD 3.75 GiB
[ +0,003541] mmcblk0: p1
[ +0,000427] mmcblk0: mmc0:59b4 USD 3.75 GiB
[ +0,158015] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ +0,000329] Indeed it is in host mode hprt0 = 00001101
[ +0,241939] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.52
[ +0,000026] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ +0,000020] usb 1-1: Product: USB2.0 Hub
[ +0,000960] hub 1-1:1.0: USB hub found
[ +0,000368] hub 1-1:1.0: 4 ports detected
[ +0,316351] usb 1-1.4: new high-speed USB device number 3 using dwc_otg
[ +0,132247] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.52
[ +0,000025] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ +0,000020] usb 1-1.4: Product: USB2.0 Hub
[ +0,000793] hub 1-1.4:1.0: USB hub found
[ +0,000377] hub 1-1.4:1.0: 4 ports detected
[ +1,636785] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ +0,499754] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ +0,142545] usb 1-1.3: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01
[ +0,000025] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0,000020] usb 1-1.3: Product: AX88772B
[ +0,000017] usb 1-1.3: Manufacturer: ASIX Elec. Corp.
[ +0,000016] usb 1-1.3: SerialNumber: B02428
[ +0,287378] usb 1-1.4.3: new high-speed USB device number 5 using dwc_otg
[ +0,211127] usb 1-1.4.3: New USB device found, idVendor=0bc2, idProduct=61b3, bcdDevice=13.06
[ +0,000026] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0,000020] usb 1-1.4.3: Product: M3 Portable
[ +0,000016] usb 1-1.4.3: Manufacturer: Seagate
[ +0,000017] usb 1-1.4.3: SerialNumber: 35777E04120000BA
[ +0,000744] usb 1-1.4.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ +0,000023] usb 1-1.4.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ +0,000019] usb-storage 1-1.4.3:1.0: USB Mass Storage device detected
[ +0,000981] scsi host0: usb-storage 1-1.4.3:1.0
[janv. 5 12:24] scsi 0:0:0:0: Direct-Access Seagate M3 Portable 1306 PQ: 0 ANSI: 6
[ +0,378619] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ +0,000546] sd 0:0:0:0: [sda] Write Protect is off
[ +0,000023] sd 0:0:0:0: [sda] Mode Sense: 33 00 00 08
[ +0,000455] sd 0:0:0:0: [sda] No Caching mode page found
[ +0,000186] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ +0,071743] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ +0,003055] sd 0:0:0:0: [sda] Attached SCSI disk
[ +8,015797] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ +0,000110] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ +0,025449] devtmpfs: mounted
[ +0,008217] Freeing unused kernel image (initmem) memory: 1024K
[ +0,000541] Run /sbin/init as init process
[ +0,000014] with arguments:
[ +0,000011] /sbin/init
[ +0,000011] splash
[ +0,000012] with environment:
[ +0,000010] HOME=/
[ +0,000013] TERM=linux
[ +1,254052] systemd[1]: System time before build time, advancing clock.
[ +0,447371] NET: Registered PF_INET6 protocol family
[ +0,001790] Segment Routing with IPv6
[ +0,000054] In-situ OAM (IOAM) with IPv6
[ +0,217060] systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ +0,001153] systemd[1]: Detected architecture arm.
[ +0,031423] systemd[1]: Set hostname to <RaspberryPi>.
[ +1,717817] systemd[1]: Configuration file /lib/systemd/system/pulseaudio.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
[ +0,576627] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ +0,719268] systemd[1]: Configuration file /lib/systemd/system/pulseaudio.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ +0,035990] systemd[1]: Queued start job for default target Graphical Interface.
[ +0,015162] systemd[1]: Created slice system-getty.slice.
[ +0,001626] systemd[1]: Created slice system-modprobe.slice.
[ +0,001249] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ +0,000927] systemd[1]: Created slice User and Session Slice.
[ +0,000547] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0,001532] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0,001887] systemd[1]: Reached target Slices.
[ +0,001623] systemd[1]: Listening on Syslog Socket.
[ +0,000786] systemd[1]: Listening on fsck to fsckd communication Socket.
[ +0,000487] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ +0,001398] systemd[1]: Listening on Journal Audit Socket.
[ +0,000842] systemd[1]: Listening on Journal Socket (/dev/log).
[ +0,001068] systemd[1]: Listening on Journal Socket.
[ +0,016860] systemd[1]: Listening on udev Control Socket.
[ +0,001024] systemd[1]: Listening on udev Kernel Socket.
[ +0,001461] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ +0,004958] systemd[1]: Mounting POSIX Message Queue File System...
[ +0,005743] systemd[1]: Mounting RPC Pipe File System...
[ +0,006404] systemd[1]: Mounting Kernel Debug File System...
[ +0,006367] systemd[1]: Mounting Kernel Trace File System...
[ +0,001488] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ +0,029741] systemd[1]: Starting Restore / save the current clock...
[ +0,057716] systemd[1]: Starting Set the console keyboard layout...
[ +0,007005] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ +0,006903] systemd[1]: Starting Load Kernel Module configfs...
[ +0,009518] systemd[1]: Starting Load Kernel Module drm...
[ +0,007251] systemd[1]: Starting Load Kernel Module fuse...
[ +0,011741] systemd[1]: Started Nameserver information manager.
[ +0,001666] systemd[1]: Reached target Network (Pre).
[ +0,128139] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ +0,005561] systemd[1]: Starting File System Check on Root Device...
[ +0,013707] systemd[1]: Starting Journal Service...
[ +0,098238] fuse: init (API version 7.34)
[ +0,017969] systemd[1]: Starting Load Kernel Modules...
[ +0,006811] systemd[1]: Starting Coldplug All udev Devices...
[ +0,013631] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ +0,002018] systemd[1]: modprobe@configfs.service: Succeeded.
[ +0,001422] systemd[1]: Finished Load Kernel Module configfs.
[ +0,001955] systemd[1]: modprobe@fuse.service: Succeeded.
[ +0,001234] systemd[1]: Finished Load Kernel Module fuse.
[ +0,007008] systemd[1]: Mounting FUSE Control File System...
[ +0,011554] systemd[1]: Mounting Kernel Configuration File System...
[ +0,006528] systemd[1]: Started File System Check Daemon to report status.
[ +0,375977] i2c_dev: i2c /dev entries driver
[ +0,006964] systemd[1]: Finished Load Kernel Modules.
[ +0,006599] systemd[1]: Starting Apply Kernel Variables...
[ +0,001163] systemd[1]: Started Journal Service.
[ +1,720824] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.
[ +1,769970] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ +0,010376] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ +0,000035] [vc_sm_connected_init]: start
[ +0,000845] [vc_sm_connected_init]: installed successfully
[ +0,065434] mc: Linux media interface: v0.10
[ +0,256861] videodev: Linux video capture interface: v2.00
[ +0,248632] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ +0,008546] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ +0,000829] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ +0,136266] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ +0,013298] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ +0,000090] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ +0,002845] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ +0,000049] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ +0,003704] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ +0,000049] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ +0,012390] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ +0,000067] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ +0,007619] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ +0,000065] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ +0,007882] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ +0,052902] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ +0,044007] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ +0,000512] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ +0,000412] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ +0,000319] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ +0,000035] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ +0,000027] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ +0,000029] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ +0,000022] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ +0,023205] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ +0,000505] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ +0,000434] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ +0,000351] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ +0,000036] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ +0,000028] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ +0,000023] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ +0,000028] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ +0,000214] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ +0,057402] usbcore: registered new interface driver uas
[ +0,097727] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ +0,076323] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ +0,029509] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ +0,134880] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ +0,298857] brcmfmac: F1 signature read @0x18000000=0x15264345
[ +0,017056] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ +0,000776] usbcore: registered new interface driver brcmfmac
[ +0,253764] Asix Electronics AX88772C usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL)
[ +0,001035] asix 1-1.3:1.0 eth0: register 'asix' at usb-3f980000.usb-1.3, ASIX AX88772B USB 2.0 Ethernet, 00:50:b6:b0:24:28
[ +0,000283] usbcore: registered new interface driver asix
[ +0,894782] asix 1-1.3:1.0 eth6: renamed from eth0
[ +0,130775] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ +0,074077] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ +1,092664] asix 1-1.3:1.0 eth6: Link is Down
[ +0,486867] Adding 8388604k swap on /dev/sda7. Priority:-2 extents:1 across:8388604k FS
[ +0,441711] systemd-journald[126]: Received client request to flush runtime journal.
[ +0,618321] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ +0,569163] IPv6: ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready
[ +0,000440] asix 1-1.3:1.0 eth6: Link is Up - 100Mbps/Full - flow control off
[ +1,570590] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ +0,318064] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ +3,646902] uart-pl011 3f201000.serial: no DMA platform data
[ +0,481782] 8021q: 802.1Q VLAN Support v1.8
[ +3,049550] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ +5,007411] cam-dummy-reg: disabling
[ +1,048546] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ +1,280655] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
[ +9,217805] Bluetooth: Core ver 2.22
[ +0,000142] NET: Registered PF_BLUETOOTH protocol family
[ +0,000007] Bluetooth: HCI device and connection manager initialized
[ +0,000511] Bluetooth: HCI socket layer initialized
[ +0,000014] Bluetooth: L2CAP socket layer initialized
[ +0,000025] Bluetooth: SCO socket layer initialized
[ +0,351110] Bluetooth: HCI UART driver ver 2.3
[ +0,000061] Bluetooth: HCI UART protocol H4 registered
[ +0,000267] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ +0,000425] Bluetooth: HCI UART protocol Broadcom registered
[ +4,485901] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ +0,000023] Bluetooth: BNEP filters: protocol multicast
[ +0,000017] Bluetooth: BNEP socket layer initialized
[ +0,063788] NET: Registered PF_ALG protocol family
[ +0,089070] cryptd: max_cpu_qlen set to 1000
[ +4,420704] Bluetooth: RFCOMM TTY layer initialized
[ +0,000040] Bluetooth: RFCOMM socket layer initialized
[ +0,000031] Bluetooth: RFCOMM ver 1.11
[janv. 5 12:26] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
~>
Code : Tout sélectionner
~> systemd-analyze
Startup finished in 17.433s (kernel) + 52.266s (userspace) = 1min 9.700s
graphical.target reached after 52.198s in userspace
~>
Code : Tout sélectionner
~> systemd-analyze blame
38.146s upower.service
22.547s hciuart.service
16.882s dhcpcd.service
9.861s udisks2.service
9.265s smbd.service
8.123s nmbd.service
8.042s polkit.service
7.819s cups.service
6.545s ModemManager.service
6.503s avahi-daemon.service
6.298s systemd-logind.service
6.287s wpa_supplicant.service
5.455s dev-sda2.device
5.430s packagekit.service
5.114s glamor-test.service
5.106s gldriver-test.service
4.948s rng-tools-debian.service
4.434s raspi-config.service
4.332s rsyslog.service
4.207s systemd-fsck@dev-disk-by\x2dpartuuid-9cba179a\x2d05.service
3.956s systemd-fsck@dev-disk-by\x2dpartuuid-9cba179a\x2d06.service
3.369s user@0.service
3.323s dphys-swapfile.service
3.288s colord.service
2.713s bluetooth.service
2.634s systemd-fsck@dev-disk-by\x2dpartuuid-9cba179a\x2d01.service
2.377s ssh.service
2.316s lightdm.service
2.160s e2scrub_reap.service
2.077s keyboard-setup.service
2.053s systemd-fsck@dev-disk-by\x2dpartuuid-9cba179a\x2d03.service
1.995s triggerhappy.service
1.583s rpi-eeprom-update.service
1.486s systemd-fsck-root.service
1.462s fake-hwclock.service
1.444s lm-sensors.service
1.362s plymouth-read-write.service
1.242s dev-mqueue.mount
1.237s run-rpc_pipefs.mount
1.231s sys-kernel-debug.mount
1.226s sys-kernel-tracing.mount
1.057s systemd-udev-trigger.service
1.035s dev-disk-by\x2dpartuuid-9cba179a\x2d07.swap
944ms networking.service
913ms user@1000.service
814ms systemd-remount-fs.service
796ms sys-fs-fuse-connections.mount
785ms sys-kernel-config.mount
760ms modprobe@drm.service
690ms systemd-udevd.service
559ms systemd-journald.service
534ms systemd-tmpfiles-clean.service
488ms bthelper@hci0.service
469ms systemd-timesyncd.service
446ms systemd-tmpfiles-setup.service
435ms systemd-modules-load.service
424ms systemd-rfkill.service
385ms backup.mount
358ms warehouse.mount
337ms systemd-sysctl.service
321ms kmod-static-nodes.service
316ms modprobe@configfs.service
303ms modprobe@fuse.service
227ms nfs-config.service
220ms systemd-journal-flush.service
218ms pulseaudio.service
211ms systemd-sysusers.service
204ms boot.mount
198ms systemd-tmpfiles-setup-dev.service
194ms plymouth-start.service
192ms ifupdown-pre.service
167ms systemd-random-seed.service
162ms share.mount[color=red
152ms console-setup.service
140ms systemd-user-sessions.service
107ms systemd-update-utmp.service
102ms tmp.mount
101ms user-runtime-dir@0.service
97ms rtkit-daemon.service
74ms var-log.mount
61ms systemd-update-utmp-runlevel.service
45ms rc-local.service
40ms user-runtime-dir@1000.service
32ms var-tmp.mount
5ms plymouth-quit-wait.service
lines 50-85/85 (END)
Code : Tout sélectionner
~> systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @52.198s
└─multi-user.target @52.197s
└─smbd.service @42.930s +9.265s
└─nmbd.service @34.800s +8.123s
└─network-online.target @34.793s
└─dhcpcd.service @17.908s +16.882s
└─basic.target @17.760s
└─sockets.target @17.759s
└─triggerhappy.socket @17.758s
└─sysinit.target @17.706s
└─plymouth-read-write.service @16.342s +1.362s
└─local-fs.target @16.316s
└─run-user-1000.mount @38.588s
└─swap.target @12.840s
└─dev-disk-by\x2dpartuuid-9cba179a\x2d07.swap @11.794s +1.035s
└─dev-disk-by\x2dpartuuid-9cba179a\x2d07.device @11.788s
~>
Artemus24
@+